Answering these with explanation would be very helpful !!!

(A)

                        .5625 – 18UNF – 3B

1-What is hte drill diameter used to drill the minor diameter?

2-What is the major diameter of the thread?

3-What is the thread class?

4-What is the pitch?

5-What is the lead?

6-If the “3B” was replaced with “2B” what would happen to the tolerences?

7-If the “3B” was replaced with “2B” what would happen to the cost?

8-If i have half an inch of engagement, how many threads are engaged?

9-To advance the fastener would i turn it clockwise or counter clockwise? Explain how you reached your answer?

——————————————————————————————–

(B)

                        .500 – 20UNF – 2A

1-What is hte drill diameter used to drill the minor diameter?

2-What is the major diameter of the thread?

3-What is the thread class?

4-What is the pitch?

5-What is the lead?

6-If the “3B” was replaced with “2B” what would happen to the tolerences?

7-If the “3B” was replaced with “2B” what would happen to the cost?

8-If i have half an inch of engagement, how many threads are engaged?

9-To advance the fastener would i turn it clockwise or counter clockwise? Explain how you reached your answer?

——————————————————————————————–

(C) https://ibb.co/duaxWQ      (URL to image)

———————————————————————————————

(D) https://ibb.co/jrgMrQ

——————————————————————————————–

(E) 

1-Using your own words describe what we mean by a “Detail drawing” and an “Assembly drawing”. How are they similar and different from one another?

2-Use the attached B-sized drawing to asnwer.        https://ibb.co/duzVkk

-What is the name and number of the print?

-What is the scale of the drawing?

-What are all the information indicated in the title block?

————————————————————————————————————

(F)

1-A datum plane call out is used on the bottom face of the block in the view shown. If the datum letter is “C”, use the 2009 symbology to denote this datum.

2-Draw a cross sectional view describing the following. Use a leader line to attach the appropriate callout to your sketch.

Description of feature: A thru hole with a diameter of 1.250 inches, with counterbored features at both sides of the hole. Counterbore feature has a diameter of 1.750 inches and depth pf .375 inches.

3- Your design requires a surface finish that ranges between a “Medium” to “High Grade Machine Finish”. Use the appropriate surface texture symbol to request this surface in your drawing.

4-What ASME standard lists and provides information on the different engineering drawing types that are available to industry.

Our website has a team of professional writers who can help you write any of your homework. They will write your papers from scratch. We also have a team of editors just to make sure all papers are of HIGH QUALITY & PLAGIARISM FREE. To make an Order you only need to click Ask A Question and we will direct you to our Order Page at WriteDemy. Then fill Our Order Form with all your assignment instructions. Select your deadline and pay for your paper. You will get it few hours before your set deadline.