Unit V Homework Assignment

Welding fumes are a common occupational exposure. Several different welding fumes can cause similar adverse health effects. Personal sampling of a welding operation at a manufacturing facility produced the following 8-hour time-weighted average (TWA) results for individual metal fumes.

Metal Fume

Antimony Beryllium Cadmium Chromium Copper
Iron Oxide Magnesium Oxide Molybdenum Nickel

Zinc Oxide
(R) Respirable fraction (I) Inhalable fraction

Result

0.05 mg/m3 0.00001 mg/m3 0.025 mg/m3 0.02 mg/m3 0.03 mg/m3 0.5 mg/m3 0.02 mg/m3 0.003 mg/m3 0.25 mg/m3 0.3 mg/m3

OSHA PEL

0.5 mg/m3 0.002 mg/m3 0.1 mg/m3 1 mg/m3 0.1 mg/m3 10 mg/m3 15 mg/m3 15 mg/m3 1 mg/m3
5 mg/m3

ACGIH TLV

0.5 mg/m3 0.00005 mg/m3 (I) 0.01 mg/m3 0.5 mg/m3 0.2 mg/m3
5 mg/m3 (R) 10 mg/m3
10 mg/m3 (I) 1.5 mg/m3 (I)
2 mg/m3 (R)

Briefly summarize the primary health effects associated with overexposure to each type of metal fume, including both acute and chronic health effects. Explain what analytical methods you would use for evaluating health hazards in the workplace.

Identify the types of metal fumes that would produce similar health effects on an exposed worker. Calculate the equivalent exposure (in relation to OSHA PELS) for the metal fumes with similar health effects based on the “Result” column in the table above. Discuss whether you believe any of the individual metal fume exposures or the combined exposure exceeds an OSHA PEL or an ACGIH TLV.

Your homework assignment should be a minimum of two pages in length.